Name: Impact Glass Services
Address: 1301 NW 155th Dr., Miami, FL
Telephone: 7862454595
Price range: $

Let’s start by stating that in Florida, any product on the exterior of a dwelling or other structure must have either a current Florida Product Approval or a Miami-Dade County Notice of Acceptance. These documents certify the quality and the resistance of an impact door or window against severe weather conditions. To obtain these certifications, the products need to be tested at a certified facility and these should pass all the required testing protocols.

Testing can be categorized in three main groups.

<ul>
 <li>Air Leakage Resistance (Infiltration and Exfiltration)</li>
 <li>Water Penetration Resistance</li>
 <li>Structural Testing</li>
</ul>

Air Leakage: Usually, this is the first test. Positive and negative pressure difference is created across the system. The air leakage is measured and must not exceed the maximum allowable levels for exfiltration and infiltration. Air filtration pressure alone does not affect the pressure rating of the window.

Water penetration Resistance: The system is subjected to various pressure cycles while the system is sprayed with water then observed for any water penetration. The effects of a wind driven rain are recreated. Basically, pressure applied to the test unit is held for four intervals of five minutes each with a one-minute rest between intervals. This makes the test 23 minutes long in duration. To pass this test, the impact-resistant glass units must not have any drops of water pass the most interior vertical plane of the frame, which is often considered the sill dam.

Structural Testing: Finally on this test a high positive or negative pressure difference is created across the system for Design Pressure (DP) and Structural Test Pressure (STP) tests. On this category there is a test that stands out among the others. During the impact testing, a wood 2×4 is shot against the glass and frame to simulate flying debris thrown during a hurricane such as tree limbs, furniture, and other objects on the ground (LMI). The objective is that these projectiles do not penetrate the glass keeping the home protected. Same test is done for windows designed to be installed at 3rd floor or above (SMI). Here the 2×4 is replaced by a group of small ball bearings shoot at a high speed .This is because once you are above approximately 35-40ft in the air, the type of projectiles that are carried by storm winds changes.

The following are other tests done depending on each system.

<ul>
 <li>Uniform Load Deflection</li>
 <li>Positive & Negative Design Pressure</li>
 <li>Uniform Load Structural</li>
 <li>Forced-entry Resistance</li>
 <li>Stabilizing Arm Load</li>
 <li>Horizontal Concentrated Load</li>
 <li>Vertical Concentrated Load</li>
 <li>Thermoplastic Corner Weld</li>
</ul>

If you feel your impact windows and doors need to be inspected or repaired, please do not hesitate in contacting us at <a href="mailto:customerservice@impactglassmiami.com">customerservice@impactglassmiami.com</a> or call <a href="tel:7862454595">786.245.4595</a>.

At Impact Glass Services, we specialize in performing maintenance and repairs of impact windows and doors. Always following manufacturer recommendations, according the product’s Product Approval and/or Notice of Acceptance and using original parts and components.

Comencemos afirmando que, en la Florida, cualquier producto en el exterior de una vivienda u otra estructura debe tener una Aprobación de Producto de Florida actual o un Aviso de Aceptación del Condado de Miami-Dade. Estos documentos certifican la calidad y la resistencia de una puerta o ventana de impacto frente a condiciones climáticas severas. Para obtener estas certificaciones, los productos deben ser probados en un laboratorio certificado y deben pasar todos los protocolos de prueba requeridos.

Las pruebas se pueden clasificar en tres grupos principales.

<ul>
 <li>Resistencia a las fugas de aire (infiltración y exfiltración)</li>
 <li>Resistencia a la penetración del agua</li>
 <li>Pruebas estructurales</li>
</ul>

Fuga de aire: Por lo general, esta es la primera prueba. Se crea una diferencia de presión positiva y negativa en todo el sistema. La fuga de aire se mide y no debe exceder los niveles máximos permitidos de exfiltración e infiltración. La presión de filtración de aire por sí sola no afecta la clasificación de presión de la ventana.

Resistencia a la penetración de agua: En esta prueba, el sistema se somete a varios ciclos de presión mientras se rocía agua y luego se observa si hay penetración de agua. Se recrean los efectos de una lluvia impulsada por el viento. Básicamente, la presión aplicada a la unidad de prueba se mantiene durante cuatro intervalos de cinco minutos cada uno con un descanso de un minuto entre intervalos. Esto hace que la prueba tenga una duración de 23 minutos. Para pasar esta prueba, el sistema de impactos no debe permitir que ninguna gota de agua pase por el plano vertical más interior del marco, que a menudo se considera el dique del umbral.

Pruebas estructurales: Finalmente, en esta prueba se crea una diferencia de presión positiva o negativa alta en todo el sistema para las pruebas de presión de diseño (DP) y presión de prueba estructural (STP). En esta categoría, hay una prueba que destaca entre las demás. Durante la prueba de impacto, se dispara una madera 2×4 contra el vidrio para simular escombros voladores arrojados durante un huracán, como ramas de árboles, muebles y otros objetos en el suelo (LMI). El objetivo es que estos proyectiles no atraviesen el cristal, manteniendo la vivienda protegida. Se realiza la misma prueba para las ventanas diseñadas para ser instaladas del 3er piso en adelante (SMI). Aquí, el 2×4 se reemplaza por un grupo de balines disparados a alta velocidad. Esto se hace para simular los proyectiles que vemos en un huracán a más de 35-40 pies de altura.

Las siguientes son otras pruebas realizadas dependiendo de cada sistema.

<ul>
 <li>Deflexión de carga uniforme</li>
 <li>Presión de diseño positiva y negativa</li>
 <li>Carga uniforme estructural</li>
 <li>Resistencia a la entrada forzada</li>
 <li>Carga del brazo estabilizador</li>
 <li>Carga concentrada horizontal</li>
 <li>Carga concentrada vertical</li>
 <li>Soldadura de esquina termoplástica</li>
</ul>

Si cree que sus ventanas y puertas de impacto necesitan ser inspeccionadas o reparadas, no dude en comunicarse con nosotros a <a href="mailto:customerservice@impactglassmiami.com">customerservice@impactglassmiami.com</a> o llame al <a href="tel:7862454595">786.245.4595</a>.

En Impact Glass Services, nos especializamos en realizar mantenimiento y reparaciones de ventanas y puertas de impacto. Siempre siguiendo las recomendaciones del fabricante, de acuerdo con la Homologación del Producto y/o Aviso de Aceptación del producto y utilizando piezas y componentes originales.

Let’s start by stating that in Florida, any product on the exterior of a dwelling or other structure must have either a current Florida Product Approval or a Miami-Dade County Notice of Acceptance. These documents certify the quality and the resistance of an impact door or window against severe weather conditions. To obtain these certifications, the products need to be tested at a certified facility and these should pass all the required testing protocols. 

Comencemos afirmando que, en la Florida, cualquier producto en el exterior de una vivienda u cualquier estructura debe tener una Aprobación de Producto de Florida actual o un Aviso de Aceptación del Condado de Miami-Dade. Estos documentos certifican la calidad y la resistencia de una puerta o ventana de impacto frente a condiciones climáticas severas. Para obtener estas certificaciones, los productos deben ser probados en un laboratorio certificado y deben pasar todos los protocolos de prueba requeridos.

Let’s start by stating that in Florida, any product on the exterior of a dwelling or other structure must have either a current Florida Product Approval or a Miami-Dade County Notice of Acceptance.

Comencemos afirmando que, en la Florida, cualquier producto en el exterior de una vivienda u cualquier estructura debe tener una Aprobación de Producto de Florida actual o un Aviso de Aceptación del Condado de Miami-Dade. 

What laboratory tests should impact windows and doors pass? - Impact Glass Miami

¿Qué pruebas de laboratorio deben pasar las ventanas y puertas de impacto?

What laboratory tests should impact windows and doors pass?

Everything has a lifespan. At some time or other, fittings installed in your home may start to fail once they are used for some time. Sliding doors are such fittings that would tend to malfunction particularly due to excessive use. Mainly the issues may associate with the wheels of these doors; you should probably look for wheel replacement Miami in this case. However, by addressing these matters as soon as you notify them, you can minimize the severity, and the repairing cost would be significantly different.

You must be vigilant from the point you notified the slightest malfunction with your sliding door. If it doesn’t slide smoothly and tend to stuck, you should immediately address the situation. Keeping such doors for long without addressing the issue will eventually make the situation worse, and you may have to bear a larger repairing cost. This is what you should do to minimize the damage.

<ul>
<li>See if wheels are not dislocated:When used for some time, wheels of the sliding doors may tend to get dislocated. Even a slight dislocation may cause the door to slide improperly. This is not a reason for you to go for a wheel replacement Miami. The problem can be addressed using a simple method; all you have to do is to lift the door a little and shake it. Once you place the door back, be sure that the wheels are put on the track.</li>

<li>Remove the dust and grit:Depending on the type of the environment, the rollers accumulate dust, grit and other particles. At a certain point, these substances will hinder the functionality of the wheels. Observe the wheels carefully and see if they have such substance. If so, use a brush and clean the track to get the door back to its smooth functionality.</li>

<li>Lubricate the track if necessary:Sliding doors are affected by traction significantly. The traction will gradually increase over the time if the track is not lubricated properly. So, if you find that the door is malfunctioning, you should look if it needs to be lubricated. If you find that the wheels are exceptionally dry, the problem can be solved just by lubricating the tracks. However, you should make sure that you get the right kind of lubrication.</li>
</ul>

<h2>Nothing works? Then you should get the assistance of a professional</h2>

Even if you try all the methods mentioned above, and still you cannot get the door back to the normal functionality, you should probably go for a professional as it might require wheel replacement Miami too. Make sure that you opt for a service provider that has a good reputation and experience pertaining to sliding door repairs. <a href=' /'>Impact Glass Service</a> is such vendor that has gained an exceptional reputation in the industry. They have a dedicated and professional staff to visit your residence and repair your troublesome sliding door. Apart from sliding door repairs, they offer various other services for modern house owners. You may contact them via (561) 244-5296 for more information and FREE QUOTATION!

Everything has a lifespan. At some time or other, fittings installed in your home may start to fail once they are used for some time. Sliding doors are such fittings that would tend to malfunction particularly due to excessive use. Mainly the issues may associate with the wheels of these doors; you should probably look for wheel replacement Miami in this case. However, by addressing these matters as soon as you notify them, you can minimize the severity, and the repairing cost would be significantly different.



Everything has a lifespan. At some time or other, fittings installed in your home may start to fail once they are used for some time. Sliding doors are such fittings that would tend to malfunction particularly due to excessive use. 

What should you do when your sliding door is malfunctioning? - Impact Glass Miami

What should you do when your sliding door is malfunctioning?

A combination of various elements are needed to manufacture glass. Soda ash, lime and sand are the key elements used to manufacture glass; a particular mixture of these elements is heated at extreme temperatures until it melts down. The respective mixture then goes through a blowing and pressing process to become a glass we know. Ultimately, the glass will go through an annealing process (a reheating and cooling process). In fact, this process is the one that distinguishes standard glass from tempered glass.

Standard Glass

Generally, the annealing process of standard glass is speedier than the process with tempered glass. Standard glass manufacturers speed up the cooling process in order to produce more glass plies within a given time frame.

One of the most beneficial characteristics of standard glass is that they can be reworked. You can cut, polish (the edges), reshape or make holes in these standard glasses in terms of customization.

When handled properly, such customizations may not damage the glass. However, the most significant downside of the standard glass is that they are extremely fragile. This fragility is the end result of rapid annealing process. Generally, when a standard glass breaks apart, the end result will be large, dangerous and very sharp pieces of glass. The material can be exceptionally dangerous for both household and commercial properties considering danger it causes for occupants.

Tempered Glass

When it comes to tempered Glass, they have a great reputation in the industry for their safety. Because of its exceptionally safety, all the areas such as commercial and residential buildings, automobiles and equipment such as screens are made of tempered glass. Because of this very reason, tempered glass is known to be a safety glass in the industry. Upon an impact, unlike standard glass, tempered glass breaks down into tiny pieces that have relatively blunt edges. The secret behind this mechanism is its slow annealing process; tempered glass is allowed to cool down at its natural pace and hence the glass becomes stronger.

Tempered glass can tolerate heavier impacts and scratches than the standard glasses. In addition to that, when it breaks down due to a considerable impact, this type breaks down evenly and minimizes injuries. The main (probably the only) downside of the tempered glass is that you can’t rework it. Though tempered glass is strong, you need to handle them with care when moving, loading and unloading.

<h2>Conclusion</h2>

A combination of various elements are needed to manufacture glass. Soda ash, lime and sand are the key elements used to manufacture glass; a particular mixture of these elements is heated at extreme temperatures until it melts down. The respective mixture then goes through a blowing and pressing process to become a glass we know. Ultimately, the glass will go through an annealing process (a reheating and cooling process). In fact, this process is the one that distinguishes standard glass from tempered glass.

A combination of various elements are needed to manufacture glass. Soda ash, lime and sand are the key elements used to manufacture glass; a particular mixture of these elements is heated at extreme temperatures until it melts down. The respective mixture then goes through a blowing and pressing process to become a glass we know. Ultimately, the glass will go through an annealing process (a reheating and cooling process). In fact, this process is the one that distinguishes standard glass from tempered glass.

A combination of various elements are needed to manufacture glass. Soda ash, lime and sand are the key elements used to manufacture glass; a particular mixture of these elements is heated at extreme temperatures until it melts down.

What is the difference between a Tempered Glass and a Standard Glass? - Impact Glass Miami

What is the difference between a Tempered Glass and a Standard Glass?

Single-hung impact windows are a popular choice for homeowners living in areas prone to severe weather conditions. These windows are designed to withstand high winds, heavy rain, and the impact of flying debris during natural disasters like hurricanes and tornadoes. However, to ensure the longevity and effectiveness of these windows, proper operation, good handling, and maintenance are crucial. In this blog, we will provide some essential tips and guidelines to maintain the quality of your windows. Whether you are a homeowner or a contractor, this blog will provide you with the knowledge and information you need to keep your single-hung impact windows in excellent condition, ready to withstand any harsh weather that may come your way.

<h2>The composition of an Impact Single-hung Windows</h2>

The frame is the outer part of the window that is attached to the wall and holds the glass in place. It is typically made of wood, vinyl, aluminum, or fiberglass and is designed to provide structural support and insulation for the window. The frame also contains the tracks that the sash slides up and down on.

The sash is the moveable part of the window that slides up and down to open and close the window. It is usually made of the same material as the frame and contains glass panels or panes that allow light to enter the room. In a single-hung window, only the bottom sash is moveable, while the top sash remains fixed in place. The sash of a single-hung window is attached to a balance system that helps to counterbalance the weight of the sash and allows it to move up and down smoothly. The balance system is typically made up of a spring or weight mechanism that is hidden within the frame of the window.

In addition to the frame and sash, single-hung windows also have hardware components, such as locks and handles, that allow for easy operation and secure closure.

Single-hung impact windows are designed to withstand harsh weather conditions and have additional components that enhance their durability and resistance. These may include laminated glass, reinforced frames, and special weather-resistant seals and hardware.

<h2>Operation of Single-Hung Impact Windows</h2>

Single-hung impact windows have two sashes – an upper sash that is fixed in place and a lower sash that slides up and down. To open the window, the lower sash is unlocked and lifted. To close the window, the sash is lowered and locked in place.

Here are some tips for the proper operation of single-hung impact windows:

<ul>
 <li>Make sure the sash is fully closed and locked before leaving your home or going to bed.</li>
 <li>Do not force the window sash open or closed. If it feels difficult to operate, there may be an issue with the window’s balance system that requires professional attention.</li>
 <li>Keep the window tracks clean and free of debris, as this can impede the movement of the sash.</li>
 <li>Lubricate the window tracks and sash channels with silicone spray or wax to ensure smooth operation.</li>
</ul>

Regular maintenance of your single-hung impact windows can help prevent problems and extend the life of your windows. Here are some maintenance tasks you should perform:

<ul>
 <li>Clean the windows regularly using mild detergent and water. Do not use abrasive cleaners or solvents, as these can damage the window frame and hardware.</li>
 <li>Inspect the window frame and hardware for signs of wear or damage, such as cracks, dents, or rust. If you notice any issues, contact a professional to repair or replace the window.</li>
 <li>Check the weatherstripping around the window frame for damage or wear. Replace any damaged weatherstripping to ensure a tight seal.</li>
 <li>Inspect the impact-resistant glass for scratches or cracks. If you notice any damage, contact a professional to replace the glass.</li>
 <li>Check the window balance system for proper operation. If the window sash does not stay open or closed, or if it is difficult to operate, contact a professional to adjust or replace the balance system.</li>
</ul>

By following these tips for the operation and maintenance of single-hung impact windows, you can ensure they provide the necessary protection and continue to function properly for years to come.

Impact Glass Services can help you maintain and repair every component of your impact doors and windows, we are licensed to provide the right maintenance procedures necessary to keep your systems working properly.

Our vast experience on more than 2000 buildings and the knowledge of our experts and technicians has made us the best option in South Florida. Call us for a FREE inspection <a href="tel:786-245-4595">786-245-4595</a>.

Single-hung impact windows are a popular choice for homeowners living in areas prone to severe weather conditions. These windows are designed to withstand high winds, heavy rain, and the impact of flying debris during natural disasters like hurricanes and tornadoes. However, to ensure the longevity and effectiveness of these windows, proper operation, good handling, and maintenance are crucial. In this blog, we will provide some essential tips and guidelines to maintain the quality of your windows.

Single-hung impact windows are a popular choice for homeowners living in areas prone to severe weather conditions. These windows are designed to withstand high winds, heavy rain, and the impact of flying debris during natural disasters like hurricanes and tornadoes. 

Proper Care and Maintenance of Single-Hung Windows - Impact Glass Miami

Proper Care and Maintenance of Single-Hung Windows

As a resident of South Florida, you should be aware that hurricanes are a reality for you and your family. If you are still not convinced of using Impact Windows for your home, here we explain everything you should know about the advantages of using these and why these are the best option over the non-impact windows.

<ol>
 <li>
 <h3>PROTECTION</h3>
 Most building codes in the state of Florida require windows that protect you and your property during high wind events. Standard or non-impact windows don’t provide the protection required. In case an object impacts the monolithic (non-impact) glass, it will break allowing water and wind can get into your home, experiencing severe damage during a storm.
 On the other hand, Impact/Hurricane Windows use double layered/laminated glass to prevent damage. If high winds send an object against your window, the frame and the glass are strong enough to withstand it. The object may break the glass but it will stay adhered to an innerlayer or membrane preventing shards to come into your home. At the same time, wind and water will not come into your home. Preventing significant damage during a storm.
 </li>
 <li>
 <h3>ONE LESS THING TO WORRY ABOUT</h3>
 If a hurricane is headed towards your area, then you have a lot to think about. Worrying about your windows only adds to your list of things to do. If you have standard windows, then it could take hours to prepare them to weather the storm.
 Impact Windows give you one less thing to worry about. Instead of securing your windows, you can focus on what really matters – the safety of you and your family.
 </li>
 <li>
 <h3>ENERGY EFFICIENCY</h3>
 Impact Windows allow more light into your home than shutters. When a hurricane hits, it is very common to run out of electricity. During this time, your impact windows could come in handy, allowing you to have natural light in your home. Additionally, you don’t need to rush to take down any shutters after a storm.
 </li>
 <li>
 <h3>NOISE REDUCTION</h3>
 Impact-resistant windows provide an excellent noise barrier to block disturbing sounds in addition to protecting against hurricanes.
 </li>
</ol>

As a conclusion, having impact resistant/hurricane windows adds the most benefits to your property and provides peace of mind. If you already own these systems, it is imperative to keep these working all year round. Proper maintenance and repairing your products with a specialized firm will ensure this. Most manufacturer’s recommend a preventive maintenance at least every six months. If you are interested in this service or in any other type of repair, please visit our website at <a href="/">www.impactlgassmiami.com</a>. You can also contact our customer service department at <a href="tel:786-245-4595">786-245-4595</a> or <a href="mailto:customerservice@impactglassmiami.com">customerservice@impactglassmiami.com</a>.

As a resident of South Florida, you should be aware that hurricanes are a reality for you and your family. If you are still not convinced of using Impact Windows for your home, here we explain everything you should know about the advantages of using these and why these are the best option over the non-impact windows.



Impact Windows Vs Non-Impact - Impact Glass Miami

Impact Windows Vs Non-Impact

The buildings and condominiums work like machines; They are large structures that house thousands of people and receive thousands of documents, orders, workers, and furniture almost every minute. They are also made up of thousands of elements that resemble the small gears and devices that control time in a fine watch, and if a fine watch requires rigorous maintenance to keep the time accurate, then, the maintenance of a condominium of these proportions is something monumental.

At the time of construction of the building, certain material specifications are considered that try to minimize maintenance to its minimum expression. This is due to the implementation of new regulations required by city planning entities based on the continuous development of new construction technologies that can offer the best cost-benefit ratio. These specifications refer to all the elements that make up the buildings, such as floors, ceilings, doors and windows, facades, roofs, and walls, among many others. Each of these elements has installation and maintenance manuals provided by its manufacturers which must be followed rigorously. Construction products manufacturers base their developments and innovation procedures on different aspects, which can be and are not limited to:

<ul>
 <li>The functionality of the material: The most important aspect, which, in essence, guides the other aspects. The functionality is based primarily on the type of climate in which the material is going to be used, the weight it can carry, the type of installation that is as easy as possible, and above all, the long-term benefits it can produce to the building.</li>
 <li>The aesthetics of the material: Once the functionality has been assertive, it is time to provide the best appearance and beauty to the material, this is when design and development processes are created to derive functional products that are also eye-catching.</li>
</ul>

<h2>The importance of Impact Doors and Windows</h2>

Among all the elements that make up the construction of buildings and condominiums in areas affected by hurricanes and storms, it is very important to look at the doors and windows; Sometimes we take these elements for granted since they are of our daily use. However, we are not fully aware of the benefits they provide.

Buildings work as an envelope that protects us from the elements, it is the main reason why they were created, from the cavemen in their caves to the skyscrapers in our modern times. This protection feature is complemented by the need for light and ventilation mainly provided by doors and windows. Once an opening is made to a façade to provide lighting and ventilation, it is necessary that the element or material that “covers” these openings is strong enough to withstand severe climate changes and beautiful enough to provide an aesthetic look to the city or neighborhood.

Impact windows and doors emerged as a functional and aesthetic alternative to replace the use of “shutters” in buildings. They are made of structural aluminum, laminated glass, and all the necessary hermetic accessories to mitigate the intrusion of wind and water. The buildings and condominiums found mostly on the coastlines of South Florida have impact doors and windows since this became a construction regulation by government entities, and, as well as any other element that makes up these buildings, constant rigorous maintenance is a necessary for these products to be properly maintained and for these to continue providing full protection capabilities.

<h3>What is General Maintenance for Buildings and Condominiums in South Florida?</h3>

Most of the buildings and condominiums found in South Florida that have impact doors and windows are very large and complex structures, containing an average of 200 to 300 units, each unit with at least 2 sliding glass doors and 2 windows (single hung or sliding), which would give a minimum estimate of approximately 500 doors and 500 windows per building. In order to keep these systems working properly, it is necessary the conformation of the building association made up of owner members, and at the same time, a management company that is in charge of providing all the necessary personnel for its correct operation, such as administrative staff, maintenance technicians and engineers, cleaning staff, and very important, companies that provide maintenance services, which are responsible for providing maintenance to air conditioning systems, elevators, flooring, alarms and security, fire-fighting and of course doors and windows.

Statistically, among the general complaints that can be presented by the owners or tenants, a high percentage is constituted by the malfunction of the doors and windows. This is because owners and tenants do not carry out the recommended maintenance required by the manufacturer to obtain the correct functioning of the assemblies. It is in this case that the property’s doors and windows be fully inspected, and that maintenance service be performed. This to efficiently repair all assemblies in the building to achieve their correct functionality and operation. This service will guarantee preventive protection against any hurricane-related issues such as water intrusion through doors and windows.

South Florida Management companies contact us as their first option to perform repair and maintenance service of impact doors and windows. The last, to carry out all the tasks required to solve and prevent any doors and windows related issues mentioned by owners and tenants, it is the easiest way to have periodic controls that drastically minimize complaints and keep the association happy.

<h3>The following is the process required to achieve successful General Maintenance:</h3>

<ol>
 <li>Enumeration of doors and windows: As a first instance, it is vitally important to hold a meeting with the management company, this in order to obtain the total number of apartments, the layout of each one and of course the total number of doors and windows found in these.</li>
 <li>Define the scope of service: This is when the total number of services to be executed is established, depending on the problems presented by each unit, for which it is accompanied by a free assessment visit by our experts. In general, the management company can send a letter of recommendation to all owners, in which appears the name and contact of our company, the scope of the service to be performed and a special price agreed with the association.</li>
 <li>Preventive Maintenance Plan: In the same way, a Preventive Maintenance Plan can be established that includes a unified service package, which is conditioned to the number of doors and windows found in each unit.</li>
 <li>Technicians Appointments: In conjunction with building management, repair appointments are scheduled so that technicians can access units and perform the service.</li>
</ol>

The buildings and condominiums work like machines; They are large structures that house thousands of people and receive thousands of documents, orders, workers, and furniture almost every minute. They are also made up of thousands of elements that resemble the small gears and devices that control time in a fine watch, and if a fine watch requires rigorous maintenance to keep the time accurate, then, the maintenance of a condominium of these proportions is something monumental.



The buildings and condominiums work like machines; They are large structures that house thousands of people and receive thousands of documents, orders, workers, and furniture almost every minute. 

General Building Maintenance Service - Impact Glass Miami

General Building Maintenance Service

Impact windows and doors often require maintenance to keep these in good working condition. When maintenance is not performed on a regular basis, operable components such as springs, rollers and handles suffer significantly, sometimes to the point of no repair. In these cases, replacement of such parts is a must.

Like any other mechanical device, impact windows and doors are designed with components and parts with a specific quality, durability, resistance, and performance. At the design phase, window manufacturers select specific parts that will perform and withstand the regular use of the assembly as well as the weather and environment in which such product will be installed.

When parts get damaged and need replacement, using aftermarket parts (not original) may compromise the performance and operability of such products. Sometimes using the wrong parts may cause unrepairable damage which will subsequently incur in high costs to fully replace a door or window assembly.

Aftermarket parts are often fabricated with materials of lesser quality which ultimately cut costs in the manufacturing process. The main difference between original and aftermarket is price, and as a consumer, you need to understand where these “savings” come from.

At Impact Glass Services, we always use original components. Although these may not be the cheapest, they guarantee the proper operation of the assembly as per the manufacturer’s original specifications and design intent.

We currently stock original rollers, handles, spring balances, locks, gaskets and weatherstripping components which will ensure a proper repair of your products. In addition to our experienced sales consultants, the ability and training of our technicians, and the use of original parts, we can guarantee that your products will be repaired and maintained correctly.

For a free consultation, please do not hesitate in contacting us at <a href="tel:786-245-4595">786.45.4595</a> or via email at <a href="mailto:customerservice@impactglassmiami.com">customerservice@impactglassmiami.com</a>.

Impact windows and doors often require maintenance to keep these in good working condition. When maintenance is not performed on a regular basis, operable components such as springs, rollers and handles suffer significantly, sometimes to the point of no repair. In these cases, replacement of such parts is a must. 



Why should windows and doors be repaired with original parts - Impact Glass Miami

Why should windows and doors be repaired with original parts

Throughout the years, the glazing industry has been evolving at an accelerated pace. Basic design of glazing products such as windows and doors has developed hugely due to the needs of the industry. Higher load capacity, higher water and air resistance requirements are some of the factors that have come into play together with feasibility and cost. In geographical areas that are exposed to extreme weather such as South Florida, designers have tried to maintain a balance between performance, aesthetics and cost, making this task a bit challenging.

In today’s market, you can find a large variety of products that have adopted different assembly methods in an attempt to maintain the above mentioned “balance”. Products can be wet-glazed or dry-glazed. The main difference between one another is the way glass is secured to its frame. Wet-glazed products are the ones in which the glass is secured to the frame with the use of a structural sealant. These joints are hermetically sealed with a very strong adhesion that can hold the glass in place during hurricane storm winds. On the other hand, the dry-glazed method implements pressure bars and/or gaskets to hold the glass in place during high force winds.

It has been noted though, that the dry-glazed method is not so friendly with weather elements such as salty and moist air. After installation, and as a result of improper maintenance procedures, it has been noted that salt build up will appear at joints and crevasses of different dry-glazed products. If nothing is done, the salt build-up can become so severe that it will start compromising the performance of the framing members, weakening the system, as the material will basically corrode.

As a solution to this issue, the upmost recommendation is to follow manufacturers maintenance procedures. Most of these will suggest washing your products regularly with a damp cloth and mild soap to remove salt residue and clean tight joints. If the problem has evolved long enough, then more aggressive measures need to be adopted.

In some cases, it is recommended to remove the glazing gaskets partially to access the compromised surfaces. Once exposed, the areas need to be properly treated. Sanding, priming and application of metal filler material such as “bondo” may be required. Once corrected, then field applied electrostatic paint is applied to rejuvenate the surface and restore its original appearance. Finally, a bead of structural sealant is applied at the glass to metal joints to hermetically seal this condition and prevent this anomaly from occurring again. It is highly recommended that these procedures be performed by experienced and licensed contractors so that the end results is the best expected and to ensure the continuity of the performance of your glazing products through many years to come.

Throughout the years, the glazing industry has been evolving at an accelerated pace. Basic design of glazing products such as windows and doors has developed hugely due to the needs of the industry. Higher load capacity, higher water and air resistance requirements are some of the factors that have come into play together with feasibility and cost. In geographical areas that are exposed to extreme weather such as South Florida, designers have tried to maintain a balance between performance, aesthetics and cost, making this task a bit challenging.



Throughout the years, the glazing industry has been evolving at an accelerated pace. Basic design of glazing products such as windows and doors has developed hugely due to the needs of the industry. 

Salt Residue – It’s Origins, Risks and Solutions - Impact Glass Miami

Salt Residue – It’s Origins, Risks and Solutions

It is not possible to predict the future, but you can mitigate any potential negative impact when choosing your service provider. There will always be more than one option and the following are considerations you can use to choose the best one:


 Established: Impact Glass Services was established in March 2009. We have serviced over 2,000 buildings and repaired more than 30,000 doors and windows.
 
 Contractor License: All of our workers are certified as experts in windows, specifically, we have the Glass and Glazing Contractor’s License in Florida.
 
 Insurance Coverage: We mainly service buildings that have impact windows and doors (i.e., those that can withstand hurricanes or strong storms) installed. We carry insurance that provides full coverage for our vehicles, workers compensation and general liability.
 
 Experience: Since the company’s establishment, more than 14 years ago, we have worked with an infinite number of products, inconveniences, problems, challenges, all of which has helped us become better at what we do.
 
 Training: Our technicians are required to complete continuing education coursework concerning behavior in the workplace, preventative measures, procedures, how to handle equipment, installation, appropriate use of supplies, and the operation of doors and windows. Our suppliers, who are experts on the different brands of impact windows and doors in South Florida, are well equipped as well. Staying on the cutting edge and on top of industry trends is instrumental to our company, so we have a training center within our own company that leverages our relations with our suppliers to provide us with top-tier training.
 
 Accomplished background of leadership: The founders of Impact Glass Services have their academic background in industrial engineering and Architecture, giving the company it’s solid foundation. Before starting Impact Glass Services, its leadership worked in the leading window company in South Florida, called RC aluminum industries, in which the leaders were able to obtain a vast amount of knowledge and experience in the impact window industry.
 
 Product Specialization: We are experts in maintaining and repairing impact doors and windows. Our services include:
 <ul>
 <li>Replacing broken crystal to the exact specifications of the original installation in your door or window</li>
 <li>Replacing broken parts to restore the doors’ and windows’ operability</li>
 <li>Renovating your doors and windows with the most effective and highest quality paint, specifically, Electrostatic paint. In addition, we apply a layer of new silicone, so the entire door looks new.</li>
 <li>Repairing water or air filtration systems</li>
 <li>Providing preventive care or maintenance so your products function the way it was designed and approved</li>
 <li>Repairing damages of corrosion caused from high salinity and apply a preventive maintenance so it does not happen again</li>
 </ul>
 
 Reliable: Whatever inconveniences you, we are ready to resolve it and finish the job leaving you satisfied with our service.
 
 Referral: Ask your building manager about us, they most likely have requested our services for a neighbor’s repair or maintenance.

Impact Glass Services is the best company in repairs and maintenance of impact doors and windows in South Florida. Call us at <a href="tel:7862454595">(786)245-4595</a> or contact us via email at <a href="mailto:customerservice@impactglassmiami.com">customerservice@impactglassmiami.com</a> to get a free estimate and the best service.

It is not possible to predict the future, but you can mitigate any potential negative impact when choosing your service provider. There will always be more than one option and the following are considerations you can use to choose the best one:



Why IGS is the best option for repairs and maintenance for your impact doors and windows? - Impact Glass Miami

Why IGS is the best option for repairs and maintenance for your impact doors and windows?

Glass is an abundant material in modern construction, but not all glass is created equal. Impact or laminated glass is a type of glass that offers a range of benefits over traditional glass, including increased safety, security, and energy efficiency. Whether you’re a homeowner, a business owner, or a building manager, understanding the advantages of impact or laminated glass can help you make informed decisions when selecting glass products for your property. In this blog post, we’ll explore the many benefits of impact or laminated glass and provide practical tips on how to maintain it. By the end of this article, you’ll have a better understanding of the unique properties of this essential material and how it can improve the safety, security, and functionality of your building.

 <h2>General Benefits of Using Impact or Laminated Glass</h2>

 <ol>
 <li>Safety: One of the primary benefits of using impact or laminated glass is increased safety. When regular glass shatters, it breaks into sharp, dangerous shards that can cause serious injury. However, impact or laminated glass is designed to resist shattering upon impact. In the event of a breakage, the glass will crack but will not break into dangerous pieces, reducing the risk of injury from broken glass.</li>
 <li>Security: Impact or laminated glass is more difficult to break through than regular glass, making it a better option for buildings or homes that require extra security. It can resist impact from blunt objects, and in some cases, can even withstand repeated blows from a hammer or other tool. This makes it a popular choice for storefronts, financial institutions, and other buildings that require high levels of security.</li>
 <li>Sound insulation: Impact or laminated glass can reduce noise pollution, making it ideal for buildings located in noisy areas. The glass is designed to dampen vibrations and absorbs sound waves, which helps to reduce noise transmission from outside. This can create a more comfortable living or working environment.</li>
 <li>UV protection: Impact or laminated glass with Low-E coatings can block harmful UV rays, protecting your skin and furniture from damage. UV rays are a leading cause of skin cancer and can also cause furniture, carpeting, and other items to fade or discolor over time. By blocking these harmful rays, impact or laminated glass can help to protect your health and your belongings.</li>
 <li>Energy efficiency: Impact or laminated glass with Low-E coatings can help reduce energy costs by keeping heat inside during the winter and blocking heat from entering during the summer. The glass is designed to reduce heat transfer, which can help to keep your home or building cooler in the summer and warmer in the winter. This can lead to significant energy savings over time.</li>
 <li>Durability: Impact or laminated glass is more durable than regular glass, making it more resistant to scratches and other forms of damage. This can help to extend the life of your windows, doors, or other glass surfaces, reducing the need for frequent repairs or replacements.</li>
 <li>Aesthetics: Impact or laminated glass can enhance the appearance of a building by providing a sleek and modern look. The glass can be customized to fit a variety of shapes and sizes and can also be tinted or colored to match the surrounding decor. This makes it a popular choice for modern homes and commercial buildings.</li>
 <li>Easy to clean: Impact or laminated glass can be cleaned using a mild detergent and a soft cloth, making it easy to maintain. Unlike some other types of glass, it does not require special cleaners or equipment to keep it looking its best.</li>
 <li>Longevity: Impact or laminated glass has a longer lifespan than regular glass, reducing the need for frequent replacements. With proper maintenance, it can last for many years, making it a cost-effective option in the long run.</li>
 <li>Cost-effective: While impact or laminated glass may have a higher upfront cost than regular glass, it can be cost-effective in the long run due to its durability and longevity. With fewer repairs and replacements needed over time, it can help to save money in the long run. Additionally, the energy savings and other benefits of impact or laminated glass can also help to offset the initial cost.</li>
 </ol>

 <h2>Special Benefits of Impact or Laminated Glass in High-Velocity Hurricane Zones</h2>

 Laminated glass is an excellent choice for buildings located in high-velocity hurricane zones. During a hurricane, debris propelled by strong winds can break regular glass, causing significant damage and exposing occupants to the elements. However, laminated glass is designed to withstand high-velocity impacts and can resist shattering, providing a layer of protection against debris and high winds. In addition to its impact resistance, laminated glass can also help to prevent water intrusion, which can be a significant concern during hurricanes. The interlayer between the glass panes in laminated glass is designed to seal the glass, preventing water from entering the building even if the glass is cracked or broken.

 As a result, laminated glass can help to keep occupants safe and reduce property damage during a hurricane. It is no wonder that many building codes in high-velocity hurricane zones require laminated glass in windows and doors as a safety measure.

 In summary, if you live or work in a high-velocity hurricane zone, choosing laminated glass for your windows and doors can provide an extra layer of protection against the elements and help keep you and your property safe during a hurricane.

 <h2>How to properly maintain your Impact or Laminated Glass</h2>

 Now that you know the benefits of using impact or laminated glass, it’s important to know how to maintain it properly. Here are some tips.

 <ul>
 <li>Clean the glass regularly using a mild detergent and a soft cloth.</li>
 <li>Avoid using abrasive cleaners or tools that can scratch the glass.</li>
 <li>Inspect the glass periodically for signs of wear and tear, and have it replaced if necessary.</li>
 <li>Avoid slamming doors or windows, as this can damage the glass.</li>
 </ul>

 <h2>What to Do if Your Impact or Laminated Glass Breaks</h2>

 While impact or laminated glass is designed to resist shattering, it can still break under certain circumstances. If this happens, it’s essential to take the proper steps to ensure your safety and prevent further damage.

 <ol>
 <li>Stay away from broken glass: If you notice that your impact or laminated glass has broken, stay away from the area to avoid any potential injuries from broken glass.</li>
 <li>Assess the damage: If the glass has broken due to an impact, such as a tree limb or other debris, assess the damage to determine if the broken glass has caused any further damage to your property.</li>
 <li>Call a professional: It’s important to contact a professional to replace your broken glass. They can assess the damage and determine if the glass needs to be replaced entirely or if it can be repaired.</li>
 <li>Clean up carefully: If you must clean up broken glass, make sure to wear gloves and protective footwear. Sweep up large pieces of glass and use a vacuum cleaner to pick up smaller fragments. Dispose of the broken glass carefully in a trash bag.</li>
 </ol>

 In conclusion, impact or laminated glass is a better option for buildings or homes that require extra safety and security. It also offers other benefits, such as sound insulation, UV protection, energy efficiency, and durability. By following the tips outlined above, you can maintain your impact or laminated glass properly and ensure that it lasts for years to come.

 By following these steps, you can ensure your safety and prevent further damage to your property in the event of broken impact or laminated glass. Remember, always contact a professional to handle the replacement of broken glass.

 Impact Glass Services can help you maintain and repair every component of your impact doors and windows, including the replacement and exact match of your existing broken glass. We are licensed to provide the right maintenance procedures necessary to keep your systems working properly.

 Our vast experience on more than 2000 buildings and the knowledge of our experts and technicians has made us the best option in South Florida. Call us for a FREE inspection <a href="tel:786-245-4595">786-245-4595</a>.

Glass is an abundant material in modern construction, but not all glass is created equal. Impact or laminated glass is a type of glass that offers a range of benefits over traditional glass, including increased safety, security, and energy efficiency. Whether you’re a homeowner, a business owner, or a building manager, understanding the advantages of impact or laminated glass can help you make informed decisions when selecting glass products for your property. In this blog post, we’ll explore the many benefits of impact or laminated glass and provide practical tips on how to maintain it. By the end of this article, you’ll have a better understanding of the unique properties of this essential material and how it can improve the safety, security, and functionality of your building.



Glass is an abundant material in modern construction, but not all glass is created equal. Impact or laminated glass is a type of glass that offers a range of benefits over traditional glass, including increased safety, security, and energy efficiency.

10 Benefits of Using Impact or Laminated Glass Rather than Regular Glass, and How to Maintain It - Impact Glass Miami

10 Benefits of Using Impact or Laminated Glass Rather than Regular Glass, and How to Maintain It

When a sliding glass patio door or window is difficult to open, and it is not working properly, it can feel like it weighs a ton. Adding to the hassle of trying to close the door or window, can then become a safety hazard and an energy efficiency problem.

<h2>Here are some of the reasons why sliding glass doors and windows could be difficult to open:</h2>

<ul>
 <li>Sliding door rollers are worn due to age, rust, salt buildup or excess moisture</li>
 <li>Worn down tracks</li>
 <li>Build-up of pet hair and dirt on the rollers or track</li>
 <li>Broken handles</li>
 <li>The locks stick</li>
 <li>Broken operators, arms or hinges</li>
 <li>Broken window guides</li>
 <li>Window balances are worn due to age, rust, salt buildup or excess moisture</li>
</ul>

Sliding glass door and window malfunction can be caused by any of the above-mentioned issues, each of which can be difficult to detect and repair. When you experience such issues, it is best to hire a professional rather than undertake the task on your own for a number of reasons.

<h2>Getting the job done right</h2>

The most efficient way to get your sliding glass doors and windows repaired quickly is through hiring a professional. Windows and doors must be secure and airtight, firm and in place. Those who undertake the task on their own often spend hours figuring out what the problem is, the repair itself takes a long time, and the right tools may not be available. Therefore, if you are looking to get the job done fast, then it is best to let a professional handle the repair.

<h2>Reliability</h2>

Windows and doors professionals will always pledge their job. This will help to take care of any problem that might arise in the future or any other unfortunate circumstances. If during the project a window or door breaks, they are likely to repair or replace it with another free of charge. Also, if any problem happens in the future that might be as a result of the repair, your window and door professional will correct it at no cost.

<h2>Your Safety is Important</h2>

Handling doors and windows can result in cracking and/or breaking of the glass panel when not done properly. This process could be extremely hazardous. Professionals are well trained on how to stay safe during repairs as well as ensuring the safety of your premises.

<h2>Saves You Money</h2>

Another advantage of hiring a professional is that it saves you money. While it may not seem like it at the onset, the cost of repairing your sliding glass doors and windows on your own can be quite high. You may invest in unnecessary materials or you may cause additional problems that require additional professional services to fix. With that said, it is recommended that you hire a professional. The professional will be able to immediately identify the problem, understand what needs to be fixed, and perform the solution. This way, you don’t need to worry about added costs of a repair gone wrong. Overall, by hiring a professional, you can get your sliding glass doors and windows repaired efficiently, safely, correctly, and at the right price.

When a sliding glass patio door or window is difficult to open, and it is not working properly, it can feel like it weighs a ton.  Adding to the hassle of trying to close the door or window, can then become a safety hazard and an energy efficiency problem.



Why You Should Hire a Professional for Sliding Glass Doors and Window Repairs - Impact Glass Miami

Why You Should Hire a Professional for Sliding Glass Doors and Window Repairs

A silicone sealant, or caulk, is a heavy-duty and gel-like adhesive used for construction due to its flexibility and durability, silicone sealant has been in use for a very long time and its primary goal is the same: to keep moisture or air from getting in or out. It seals the gaps between two surfaces or materials in the strongest and most efficient way possible.

Unlike other adhesives, silicone keeps its elasticity. Silicone sealants are commonly used to seal windows and sliding glass doors, as they provide a water-resistant seal that maintains a strong hold against harsh weather conditions.

Silicone caulks are powerful, easy-to-use sealants that are appropriate for countless applications. flexible and stable, most silicone caulks are highly resistant to weather, temperature, water, and chemicals, making them versatile for indoor and outdoor use.

100% silicone caulk is waterproof, shrink-proof and it will last more than 20 years. Silicone sealants do not suffer any damages with the radiation of UV rays, humidity or contamination created by particles or harmful gases.

The silicone caulk doesn’t change its color and it doesn’t crack. It’s important to notice that sliding glass doors are exposed to different movements and vibrations for example:

<ul>
 <li>Movement of the infrastructure of a building</li>
 <li>Strong wind loads</li>
 <li>Thermal wave vibrations</li>
 <li>variation in the temperature</li>
</ul>

For all these reasons, the silicone assures tightness on the perimeter of a sliding glass door.

If you feel the seals of your windows and doors are compromised or deteriorated please feel free to contact Impact Glass Services for a free inspection and estimate.

A silicone sealant, or caulk, is a heavy-duty and gel-like adhesive used for construction due to its flexibility and durability, silicone sealant has been in use for a very long time and its primary goal is the same: to keep moisture or air from getting in or out. It seals the gaps between two surfaces or materials in the strongest and most efficient way possible.



Benefits of using silicone 100% on sealing of sliding glass doors and windows - Impact Glass Miami

Benefits of using silicone 100% on sealing of sliding glass doors and windows

Selecting an Impact Glass Door is very important, you do not need to sacrifice design for security because you can select from different options to find the best design that fits your home style.

Two of the most common Impact Glass Door styles are:

<ul>
 <li>Sliding Glass Doors 
 Impact Glass Sliding doors are common in many houses, particularly as an entrance to the patio and backyard.</li>

 Impact Glass Sliding Glass Doors are available in many sizes and configurations including two track (up to 4 panels) and three track (up to 6 panel) configurations.

 Impact Glass Sliding Doors are a perfect solution for space, ventilation and aesthetic considerations.

 <li>French Doors (Swing Doors) 
 Impact Glass French Doors allow you to enjoy unobstructed exterior views, they are very elegant and you can use them to bring the outside inside. The Impact Glass French Doors can also be used as entry impact door or passage door. Impact Glass French doors can fit virtually any application you desire.</li>

 The Impact Glass French Doors are manufactured with top-of-the-line components such as solid brass or stainless steel hinges, Baldwin solid brass locks and levers, multiple layers of weather-stripping and strong silicone sealants.
</ul>

After selecting the Design you also will need to consider:

<ul>
 <li>Select a finish: Impact Doors come in a host of standard and custom finishes. Some finishes are: Bronze, White, Clear Anodized, Hazelnut Brown, Mahogany Red, Walnut Brown.</li>
 <li>Selected hardware: You can choose from a variety of hardware, the style and color that better fits your home design.</li>
 <li>Pick a glass tint: You can select the glass tint colors such as Clear, Gray, Dark Gray, Bronze among others.</li>
</ul>

Selecting Impact Glass Doors for your home is easier than you think, you can renovate your house look selecting the style and color that better fits your home design and getting also protection from hurricanes and vandalism.

Give us a call, and we will assist you in the selection of your Impact Glass Doors.

Selecting and Impact Glass Door is very important, you do not need to sacrificed design for security because you can selected from different options to the best design that fits your home style.

Which Impact Glass Door is Better for You? - Impact Glass Miami

Which Impact Glass Door is Better for You?

In some cases, having impact resistant windows is not enough to avoid headaches during a storm. To mitigate damages of your floors, baseboards, drywall, blinds, carpet, and furniture among others, it is very important to maintain or inspect certain components to guarantee the system's performance.

<h3>1. ARE LOCKS WORKING PROPERLY?</h3>
Inspect the locking hardware. Ensure operable panels are locked properly to avoid them opening with the high winds a storm can bring. Periodically, clean the locks and lubricate them to maintain their proper function.

<h3>2. IS YOUR WEATHER-STRIPPING, GASKETS, AND WET GLAZE IN GOOD CONDITION?</h3>
Inspect the weather-stripping, gaskets and wet glaze of the doors and windows. Visually inspect these components for any missing chunks, damage, cracks, movement, or lack of compression. Any of these signs could mean that the component needs to be replaced.

<h3>3. ARE THE WEATHER COMPONENTS IN THE CORRECT POSITION?</h3>
This is one of the hardest inspections to do. Each system/manufacturer has weathering components strategically installed along the frame to minimize the strength of air coming through. It is important to keep in mind that an operable system is not air and watertight. Existing gaps are necessary for panel movement and alignment.

<h3>4. ARE WEEP HOLES UNCLOGGED AND/OR DEBRIS-FREE?</h3>
Weep holes are small openings that allow water to drain from within an assembly. It is crucial to have the weep holes inspected to make sure they are free of debris. If they get clogged, these must be cleaned to restore their proper draining function.

<h3>5. ARE SCREW HEADS SEALED PROPERLY?</h3>
Since it rains most of the year in Florida, this inspection should not be limited to just hurricane season, but throughout the entire year. Anchors need be sealed to avoid water entering the frame’s predrilled penetrations. Within time, this sealant disintegrates or peels, leaving a perfect path for water to enter the system causing mold growth and destroying surrounding components.

<h3>6. ARE THE VENTS OR PANELS PROPERLY ALIGNED?</h3>
Check the alignment of vents and/or panels with the frame. Proper alignment will guarantee that the locks, weather-stripping, gaskets, and pile pads can achieve their purpose. This simple step is a compliment to all previous maintenance steps.

Following these guidelines, will ensure that your impact resistant product(s) will be preforming at the very best level that they were designed. It is recommended that all of the above procedures be conducted by a professional licensed contractor at least every 6 months to ensure that your windows will be in the best shape possible to confront the worst of the elements.

In some cases, having impact resistant windows is not enough to avoid headaches during a storm.  To mitigate damages of your floors, baseboards, drywall, blinds, carpet, and furniture among others, it is very important to maintain or inspect certain components to guarantee the systems performance.

Keep you Impact Windows and Doors Performing Efficiently - Impact Glass Miami

Keep you Impact Windows and Doors Performing Efficiently

Hurricanes are potentially dangerous tropical storms with high wind speeds, and due to climate change, they have become more frequent and stronger over the years. It is known that hurricanes “feed” on the high heat of the ocean due to the increase in temperatures on earth. The National Oceanic and Atmospheric Administration (NOAA) for the year 2022 had forecasts of up to 10 hurricanes, of which three to six could become major hurricanes. The above is mentioned, with the purpose of raising awareness around these phenomena and knowing that it is very important to keep safe.

Hurricane season runs from the beginning of June to the end of November, and during this time you must protect your home and your family from any storm that may come. This period serves the municipal authorities to have all the resources available and to alert the community for any eventuality. In the same way, the condominiums and buildings, through their associations and management companies, carry out all the necessary preparations to secure all windows and doors that may be susceptible to the entry of water and wind and thus avoid extensive damage inside the property.

In 1992, Hurricane Andrew was a category 5 storm that entered Miami-Dade County through Homestead and devastated everything in its path. This was the starting point for new regulations in the Florida building code, and because of this, measures were taken. Florida and Miami-Dade are now a national benchmark in the study and approval of construction products, as well as the execution of construction projects that are hurricane-proof. It is for these reasons that if you live in a High-Velocity Hurricane Zone (HVHZ), it is very likely that your house or apartment has an impact-resistant or hurricane-proof door and/or window system installed.

<h3>Verify the proper operation of your impact windows and/or doors with the following checklist:</h3>

Following this checklist will let you know if your window or door is working properly and if it has the factory performance that it was determined at the moment of design.

<ul>
 <li>Identify if your door or window is impact or hurricane-proof.
 To carry out this step it is necessary to identify the manufacturer and model of your door or window, you can see this on the factory sticker that must be stuck on one of the sides of the frame. Some of the most popular manufacturers in Florida are:
 <ul>
 <li>ES Windows</li>
 <li>RC Aluminum</li>
 <li>PGT</li>
 <li>CGI</li>
 <li>Kawneer</li>
 <li>Glasswall</li>
 </ul>
 The sticker will show relevant information about the company that manufactured the system, the model or line of the door or window, the Miami-Dade approval number, and the pressures that they resist according to their laboratory test.
 If your door or window was installed before 1998, it is very likely that is not an impact system. If for any reason the sticker was removed, call an impact door service and repair professional to help you identify your door or window.
 </li>
 
 <li>Check if your door or window is locking correctly:
 If when operating the handles, you find that they are not operating smoothly, that they do not move, or that when meeting the operable panel with the frame it does not lock or latch, it means that your locking mechanism needs to be repaired or replaced.
 </li>
 
 <li>Check if the operable panel of your door or window moves correctly:
 When using the operable panel of the door or window you notice that it is stuck, that it does not slide evenly, or that it is very hard to move, you should call a professional repair and maintenance company to replace the wheels on a sliding door or the balances in a single hung window.
 </li>
 
 <li>Check if your door or window lets in wind and/or sound:
 If you notice that you are hearing an irritating sound from the wind such as a whistle, or if you notice too much noise from the street, such as car horns, alarms, and traffic. It is likely that your door or window is out of alignment or uneven, and that the weatherstripping or airtight accessories are damaged or worn out. It is necessary that these accessories are replaced by a professional company.
 </li>
 
 <li>Check if your door or window lets in water.
 Impact systems are designed to let water in at certain points and at the same time let it out through drainage holes. However, if you notice there is water buildup on the bottom rail and this water is splashing or spilling completely into the inside of the property, a system diagnosis and maintenance are necessary to determine the water intrusion problem. On the other hand, if the system is fixed and you are seeing water on the floor or dripping down the inside face of the glass, it is necessary to perform a full sealing service to prevent further water intrusion.
 </li>
 
</ul>

When should I have my impact windows and doors professionally serviced and/or repaired?

Once the checklist has been carried out and having verified that one or several of the points depicted above are not as they should be, you should call an expert in impact systems such as Impact Glass Services. Your doors and/or window assemblies could be working incorrectly, which can be harmful in severe weather. Avoid water or wind damage inside your property and stay calm in any eventuality that arises.

Hurricanes are potentially dangerous tropical storms with high wind speeds, and due to climate change, they have become more frequent and stronger over the years. It is known that hurricanes “feed” on the high heat of the ocean due to the increase in temperatures on earth. The National Oceanic and Atmospheric Administration (NOAA) for the year 2022 had forecasts of up to 10 hurricanes, of which three to six could become major hurricanes. The above is mentioned, with the purpose of raising awareness around these phenomena and knowing that it is very important to keep safe.

Hurricanes are potentially dangerous tropical storms with high wind speeds, and due to climate change, they have become more frequent and stronger over the years.

Do you know if your windows or doors are working properly? Complete this basic checklist and avoid any complications in hurricane season - Impact Glass Miami

Do you know if your windows or doors are working properly? Complete this basic checklist and avoid any complications in hurricane season

<h2>Casement Windows</h2>
A casement window swings open like a door. Hinged on the side, casement windows provide excellent ventilation and unlike a single hung, it has no center rail to obstruct the view.
Casement windows have very clean lines and incredible eye appeal with the advantage of quality aluminum construction.

<h2>Casement Window with Muntins</h2>
Casement windows have very clean lines and incredible eye appeal. When used with colonial muntins give the appearance of wood but with the added advantage of quality aluminum construction.

<h2>Single Hung Windows</h2>
A single hung window is a traditional style sash operable window that opens without using any interior or exterior space. It is a perfect choice for most living areas in your home.
The single-hung window is constructed with commercial-grade aluminum frames, architecturally correct and even sightlines, a water and air resistant captured bottom rail, stainless steel fasteners and multiple points of weatherstripping while maintaining the stylish look of a traditional single-hung window.

<h2>Horizontal Rolling Windows</h2>
A horizontal rolling window operates similar to a sliding door. The sash slides open perfect for satisfying bedroom egress requirements and is a popular style for contemporary and modern homes.
The horizontal rolling window is available in very large sizes up to 111″ x 76″ (58.5 SQF) in two and three panel configurations and with very high design pressures as high as +120 /-150 PSF. Each operating sash is manufactured with a pair of patented stainless steel ball bearing supported quad rollers that ride on a nylon track providing a consistent and durable window operation.

<h2>Fixed Windows</h2>
Fixed windows are typically used for openings that are larger or where an opening window is not required. They are used to expand the view and bring in more daylight. A great choice for living rooms, dining rooms, master bedrooms and where ventilation is not a concern.
Rectangular fixed hurricane windows are perfect for really big openings. This product series is available in sizes up to 6′ x 10′. These products are great for modern and contemporary styling, or where large openings are desired.

A casement window swings open like a door. Hinged on the side, casement windows provide excellent ventilation and unlike a single hung, it has no center rail to obstruct the view.



Which are the Impact Windows Categories - Impact Glass Miami

Which are the Impact Windows Categories

Many people wonder if it is possible to remove scratches from glass. In general terms, it could be said that it is. However, there is a wide spectrum of possibilities regarding this topic. Glass is not like a diamond, even though they both look transparent, glass is a ‘non-crystalline’ solid that is derived from silica, an element found in sand that at high temperatures, turns into a liquid that It is rapidly cooled to form glass. Diamonds are derived from carbon, and their crystallization depends on temperatures and pressures much higher than those of glass, making it one of the most resistant materials in the universe, and therefore it is practically unbreakable and impossible to scratch. We know that it is practically impossible to make all our windows and doors out of diamonds, so we must take good care of our glass to avoid scratches.

 Scratches of different shapes and sizes can be found on your glass. It must be understood that, depending on the type of scratch, the solutions that can be applied will vary.

 <h3>WHAT TYPES OF SCRATCHES CAN BE FOUND ON YOUR GLASS?</h3>
 There are two types of scratches that can be found on the glass panes of your windows and doors; there are superficial scratches and deep scratches. These at first glance can seem quite the same since their difference does not depend on their length, but on their depth. Superficial scratches can be caused by passing light elements on one of the glass surfaces such as coins, toys, keys among others. While deep scratches can be caused by heavy items, such as tools, or when windows are protected with plywood in hurricane season. The way to detect a deep scratch is to pass your nail through it, if the nail is hindered when passing it means that it is deep, this is the main method to differentiate the types of scratches.

 <h3>HOW TO REMOVE SUPERFICIAL SCRATCHES FROM YOUR GLASS?</h3>
 If you find a superficial scratch on the surface of your glass, it is very likely that it can be repaired. However, most scratches found in everyday life are deep, so it is necessary to check well before proceeding. To remove a superficial scratch, the popular cerium oxide can be used together with the appropriate tools, such as polishers and specific glass sanding discs. It is not recommended that this activity be carried out as a DIY. It is necessary to call a company specialized in scratch removal for evaluation and subsequent service. The use of these tools without due care can raise the temperature of the glass and provoke breakage.

 <h3>HOW TO REMOVE DEEP SCRATCHES FROM YOUR GLASS?</h3>
 Deep scratches are of special care, a scratch of this type means that the glass suffered wear and lost millimeters of thickness in that area. To solve this situation, it is imperative to call a specialized company, which will oversee determining if the scratch is deep enough to be sanded or if a replacement is necessary. It is important to mention that glasses (depending on their type) have a molecular composition that is determined by a certain temperature applied at the time of manufacture. If this resistance temperature is exceeded by just a few degrees, the glass can suffer immediate breakage, that is why the use of heavy-duty tools, such as polishers, which work with friction, are of careful usage since they can raise the temperature of the glass in just a few seconds. For these reasons it is very valid that in certain situations it is better to replace the glass rather than repair it since there are scratches that cannot be sanded.

Many people wonder if it is possible to remove scratches from glass. In general terms, it could be said that it is. However, there is a wide spectrum of possibilities regarding this topic. Glass is not like a diamond, even though they both look transparent, glass is a ‘non-crystalline’ solid that is derived from silica, an element found in sand that at high temperatures, turns into a liquid that It is rapidly cooled to form glass. 

Many people wonder if it is possible to remove scratches from glass. In general terms, it could be said that it is. However, there is a wide spectrum of possibilities regarding this topic.

Can a scratch be removed from glass?

Hurricanes are tropical storms in which the winds can reach sustained speeds of 74 miles per hour and higher. Generally, a windspeed like this can uproot trees, destroy light poles, break glass and lift objects. In any of these situations, these objects potentially become “missiles” that can impact the glass of your windows and doors causing breakage and, in some cases, breaching the building envelope. This can be dangerous for the integrity of your home, since the wind and water can enter through these penetrations causing extreme pressure changes.

 Over time, studies on the formation and evolution of hurricanes have improved. In turn, security protocols have been increased in terms of planning and protection against hurricanes, especially in places historically affected by them. The data extracted from these studies is of vital importance for the design, manufacture and installation of hurricane-proof window and door systems. These systems are called “impact” systems due to their ability to resist the force of hurricane winds and their resilience over time. These are most made of high resistance aluminum, manufactured under rigorous production processes, and tested in laboratories. It must be considered that, like everything else, these products must be properly maintained since its resistance capability depends largely on the proper functioning of all its components.

 Maintenance protocols may vary depending on the state and design of your windows and doors, starting with basic maintenance to more complex ones. Below, we reveal different maintenance methods that can be applied to impact systems:

 <h2>MAINTENANCE PROTOCOLS FOR SLIDING DOORS AND HORIZONTAL SLIDING WINDOWS:</h2>
 <ul>
 <li>IF YOUR DOOR OR WINDOW IS NOT WORKING SMOOTHLY, THE FOLLOWING BASIC MAINTENANCE PROTOCOL CAN BE APPLIED:</li>
 <ul>
 <li>Cleaning and vacuuming of tracks for dust and debris.</li>
 <li>Track lubrication.</li>
 <li>Lubrication of operable components.</li>
 <li>Adjustment of operable panel, handle and locking mechanism.</li>
 </ul>
 <li>IF YOUR DOOR OR WINDOW MOVES WITH GREAT DIFFICULTY OR DOES NOT MOVE AT ALL:</li>
 <ul>
 <li>Cleaning and vacuuming of tracks for dust and debris.</li>
 <li>Track lubrication.</li>
 <li>Lubrication of operable components.</li>
 <li>Adjustment of operable panel, handle and locking mechanism.</li>
 <li>Replacement of wheels.</li>
 <li>Track repair or track cover installation.</li>
 <li>Replacement of handle and locking mechanism.</li>
 </ul>
 <li>IF YOUR DOOR OR WINDOW IS NOISY DUE TO WIND INTRUSION:</li>
 <ul>
 <li>Operable panel adjustment.</li>
 <li>Replacement of weatherstripping and rubber gaskets.</li>
 <li>Cleaning and unclogging weep holes.</li>
 <li>Protection and sealing of installation screws and assembly screws.</li>
 <li>Removal and reapplication of silicone on the perimeter and in assembly joints.</li>
 </ul>
 <li>IF YOUR DOOR OR WINDOW HAS A BROKEN GLASS:</li>
 <ul>
 <li>Glass replacement.</li>
 <li>Removal and reapplication of structural silicone seals around the glass perimeter.</li>
 </ul>
 <li>IF YOUR DOOR OR WINDOW PRESENTS SALT ACCUMULATION AND/OR OXIDATION ON THE SURFACE OF THE ALUMINUM:</li>
 <ul>
 <li>Chemical cleaning on all aluminum profiles surfaces.</li>
 <li>Removal of salt accumulation and cutting of rubber gaskets.</li>
 <li>Filling of aluminum in surfaces with holes affected by salt.</li>
 <li>Application of activator and primer.</li>
 <li>Application of electrostatic painting of the corresponding color.</li>
 <li>Curing and drying of the applied paint.</li>
 <li>Application of structural silicone in the perimeters of the glass and assembly joints.</li>
 </ul>
 </ul>

 <h2>MAINTENANCE PROTOCOLS FOR SINGLE HUNG WINDOWS:</h2>
 <ul>
 <li>IF YOUR WINDOW WON'T STAY OPEN AND IT'S HARD TO OPEN OR CLOSE:</li>
 <ul>
 <li>Cleaning and vacuuming of windowsills for dust and debris.</li>
 <li>Lubrication of operable components.</li>
 <li>Adjustment of operable panel, handle and locking mechanism.</li>
 <li>Replacement of spring balances.</li>
 <li>Replacement of missing plastic guides.</li>
 <li>Replacement of weatherstripping and rubber gaskets.</li>
 </ul>
 </ul>

 With the above we want to express the general concern with the lack of maintenance that is seen daily on existing impact doors and windows; There are cases in which it is necessary to replace integral components that can take months to be delivered by the manufacturers. Sometimes the damage is so severe that the maintenance and repair protocols require extensive amounts of time and labor to be carried out. For these reasons, it is necessary that basic maintenance protocols be carried out at least every 6 months.

 IMPORTANT! Keep in mind that your impact window and door systems are manufactured and installed by certified companies, Likewise, it is necessary that the maintenance protocols are carried out by a specialized company like us. If maintenance is not performed on a regular basis, it is very likely that the components that make up the systems will not work correctly and therefore lead to major problems in the future.

Hurricanes are tropical storms in which the winds can reach sustained speeds of 74 miles per hour and higher. Generally, a windspeed like this can uproot trees, destroy light poles, break glass and lift objects. In any of these situations, these objects potentially become “missiles” that can impact the glass of your windows and doors causing breakage and, in some cases, breaching the building envelope. This can be dangerous for the integrity of your home, since the wind and water can enter through these penetrations causing extreme pressure changes.



Hurricanes are tropical storms in which the winds can reach sustained speeds of 74 miles per hour and higher. Generally, a windspeed like this can uproot trees, destroy light poles, break glass and lift objects.

Maintenance that must be done to the impact systems, so they behave correctly in the event of a hurricane - Impact Glass Miami

Maintenance that must be done to the impact systems, so they behave correctly in the event of a hurricane

In South Florida, most of the high rises are located along the coastline. Architects and Developers have taken advantage of the amazing ocean views to create magnificent multi-family projects nearby. However, and due to this proximity, construction elements suffer great wear and tear in these types of properties.

Salt is an element in the environment that affects construction components significantly. Hurricane Resistant Windows and Doors are not the exception.

Hurricane windows and doors are typically made of aluminum. Although this is a very noble material, it is also affected by corrosion. Aluminum frames and members are typically coated with paint to protect the material to the elements. But with time, this finish suffers. Factory applied paint starts chalking and the coating starts to thin and to break down.

At the same time, interior hardware components are also affected. Although these are made from stainless steel, lack of maintenance combined with high levels of salt in the environment can affect these as well.

Some signs of deterioration on aluminum paint finishes are fading in color, accumulation of salt on joints and/or crevices, and high paint residue transfer to someone’s hand when rubbed.

On the other hand, stuck hardware, sliding glass door’s difficulty to slide, stuck sashes or vents and difficulty in its operation are signs of deterioration of hardware on operable assemblies.

The most proactive approach to prevent deterioration or damage from the elements is to implement preventive maintenance procedures. These include but are not limited to cleaning the aluminum surfaces, and periodic lubrication of operable hardware components.

Once the products are deteriorated more drastic but effective repair methods have to be implemented. Professional service providers such as IMPACT GLASS SERVICES LLC offer a variety of services for each condition. Our services vary from replacing corroded or damaged hardware such as rollers, handles, single hung window balances and operable window cranks and operators. For damaged or deteriorated aluminum surfaces, we can offer an onsite recoating service with electrostatic paint.

Please feel free to contact us for a free consultation to properly assess your condition and provide the most comprehensive repair recommendation. You can contact us at <a href="tel:7862454595">786.245.4595</a> or at <a href="mailto:customerservice@impactglassmiami.com">customerservice@impactglassmiami.com</a>.

In South Florida, most of the high rises are located along the coastline. Architects and Developers have taken advantage of the amazing ocean views to create magnificent multi-family projects nearby. However, and due to this proximity, construction elements suffer great wear and tear in these types of properties. 



In South Florida, most of the high rises are located along the coastline. Architects and Developers have taken advantage of the amazing ocean views to create magnificent multi-family projects nearby.

How are windows and doors affected due to proximity to the ocean - Impact Glass Miami

How are windows and doors affected due to proximity to the ocean

If you live in South Florida you and your family are exposed to Hurricanes year by year. Hurricane Season starts June 1st each year and goes until November 30th. Even we already have excellent forecast methods to anticipate the storms and the path they will have thru the Atlantic Ocean it is important to be prepare with time, remember even if the hurricane do not landfall you can be at risk.

These are some recommendations before the season starts

<h3>PREPARATION BEFORE THE SEASON</h3>
<ul>
 <li>Make a list of everything you will need at home for a hurricane</li>
 <li>Investigate the Season Forecast to be prepared and informed. Pay attention to local weather reports</li>
 <li>Know where to go, Investigate all evacuation routes.</li>
 <li>Investigate shelters near you, take into consideration that if you have pets you will need a shelter that allow them</li>
 <li>Make sure your home meets building codes for withstanding hurricanes, and they have storm shutters or Impact Glass windows and doors.</li>
 <li>Make maintenance to your Impact Glass windows and doors.</li>
 <li>Repair your Impact Glass windows and doors if need it, if they are not working properly</li>
 <li>Buy a First Aid Kit</li>
 <li>Have the proper tools, supplies, batteries and flashlights</li>
 <li>Make a family emergency communication plan.</li>
 <li>Before hurricane season trim or remove damaged trees and limbs to keep you and your property safe.</li>
 <li>Purchase a portable generator or install a generator for use during power outages. (NEVER try to power the house wiring by plugging a generator into a wall outlet.)</li>
</ul>

These are some recommendations to be prepared before the storm, during the storm and after the storm. Don’t wait until last time to be prepare.

<h3>PREPARATION BEFORE THE HURRICANE</h3>
<ul>
 <li>Buy non-perishable food and plenty of water for several days for you and your family</li>
 <li>Pay attention to local weather reports and evacuation alerts</li>
 <li>Make sure you have plenty of fuel</li>
 <li>Have a secure room available</li>
 <li>If your house is not prepared for a hurricane or is not safe enough go to a shelter or to a family or friend home that is secured.</li>
 <li>Protect windows and doors</li>
 <li>Secure outside objects</li>
 <li>Talk with your family about the plan you have for the hurricane and evacuation Stay in Secure Room.</li>
 <li>Close storm shutters, and stay away from windows.</li>
 <li>Buy a gas stove for cooking, remember power could be out</li>
 <li>Take cash and copies of your critical information if you need to evacuate</li>
 <li>Buy all the medications you need</li>
 <li>Turn your refrigerator or freezer to the coldest setting and open only when necessary.</li>
 <li>Charge your cell phone so you will have a full battery in case you lose power.</li>
 <li>Keep your car in good working condition, and keep the gas tank full; stock your vehicle with emergency supplies and a change of clothes.</li>
</ul>

DURING THE STORM
<ul>
 <li>Remain indoors</li>
 <li>Stay away of windows and doors or go to your safety room</li>
 <li>Pay attention to weather news and bulletins</li>
 <li>Do not use the phone or candles</li>
 <li>Have supplies on hand.</li>
 <li>Control water and food consumption, be sure you don’t eat and drink everything in a short period, be prepare for the damages after the hurricane.</li>
 <li>Let friends and family know where you are.</li>
</ul>

AFTER THE STORM
<ul>
 <li>Pay attention to local weather reports and be sure the storm has completely passed before going out</li>
 <li>Be patient</li>
 <li>Report downed power lines, and stay away from them.</li>
 <li>Report health issues and house damages</li>
 <li>Check-in with family and friends by texting or using social media.</li>
 <li>Avoid flood water as it may be electrically charged from underground</li>
 <li>Photograph the damage to your property to assist in filing an insurance claim.</li>
</ul>

If you live in South Florida you and your family are exposed to Hurricanes year by year. Hurricane Season starts June 1st each year and goes until November 30th. Even we already have excellent forecast methods to anticipate the storms and the path they will have thru the Atlantic Ocean it is important to be prepare with time, remember even if the hurricane do not landfall you can be at risk.



If you live in South Florida you and your family are exposed to Hurricanes year by year. Hurricane Season starts June 1st each year and goes until November 30th.

Be Prepared for the Hurricane Season - Impact Glass Miami

Be Prepared for the Hurricane Season

Electrostatic painting is a method which consists in applying paint that has numerous benefits compared to traditional painting methods. The process uses an electric charge to atomize and apply the paint, creating an even, consistent finish that adheres strongly to the surface.

The principal advantage of electrostatic paint is its efficiency because the electric charge causes the paint particles to spread out evenly. When electrostatic paint is applied there is less overspray than using traditional painting methods. This means that less paint is required to achieve the same coverage reducing costs, and minimizing the environmental impact.

Another benefit of electrostatic painting is the quality of the finish. The electric charge causes the paint particles to wrap around the object being painted, creating a uniform, high-quality finish that is free of brush or roller marks.

Electrostatic painting is also highly durable. The electric charge causes the paint to bond strongly with the surface being painted, creating a long-lasting finish that resists chipping, scratching, and fading.

In addition to its efficiency, quality, and durability, electrostatic painting is also a safer option than traditional painting methods. Because the paint is charged and atomized before it leaves the spray gun, there is less airborne paint mist, reducing the risk of inhalation.

Finally, electrostatic painting is a more environmentally friendly option than traditional painting methods. Because there is less overspray and waste, less paint is required, reducing the amount of volatile organic compounds (VOCs) released into the environment. Additionally, many electrostatic paints are formulated with lower VOCs than traditional paints, further reducing environmental impact.

In conclusion, electrostatic painting offers a range of benefits compared to traditional painting methods. Its efficiency, quality, durability, safety, and environmental friendliness make it a popular choice for industrial and commercial applications. As technology continues to advance, we can expect electrostatic painting to become an even more widely used method for applying paint in a variety of settings.

Electrostatic painting is a method which consists in applying paint that has numerous benefits compared to traditional painting methods. The process uses an electric charge to atomize and apply the paint, creating an even, consistent finish that adheres strongly to the surface.



Benefits of Electrostatic Paint - Impact Glass Miami

Benefits of Electrostatic Paint

Most patio sliding glass doors come with a built-in system to drain water away and prevent it from penetrating your home. During a rainstorm water hits the outside of the glass, dropping to the track system and draining away from the door thru weep holes. Weep holes are small slots in the exterior section of the door track designed to provide drainage when water comes in contact with the glass door. They are a critical door design feature and, to prevent water from breaching your doors, you must maintain them free of obstructions.

When installing new balcony floors, it is strongly recommended to consider the patio doors’ track system design before making the final decision of your flooring product. Contractors often overlook this and, as a result, the weep holes end up covered with mortar, construction adhesive, debris, etc. Other times the new flooring is above door track level and, by gravity, all the water gets dumped into the door tracks and eventually inside your home.

Here are some important things to consider before choosing your new patio flooring product in order to keep water from penetrating your home interior:

<ul>
 <li>Care is necessary to assure access to weep holes is kept clear. No caulking or other construction materials should be allowed to cover the holes. The opening should always be kept clean. With this said, patio door tracks should always be above floor level. In order to achieve that, it is strongly recommended that the old flooring gets removed prior to installing the new product. This will allow you to choose a tile with similar thickness while keeping the end product below door track level.</li>
 <li>If the flooring product you choose would end up being above door track level, then a channel drain system between the finished floor and the door track should be installed. This drain will prevent the water from dumping inside the track. In this type of system, the weep holes will discharge the water from the track inside the drain as well.</li>
 <li>It is extremely important that the new flooring product slopes away from the balcony walls in order to keep excessive water from reaching the doors.</li>
</ul>

Maintenance Tip: Check regularly for dirt, dead bugs and other debris that can block drainage. Remove debris promptly to prevent water from backing up into your home and causing damage. Keep your weep holes happy and you will never need to shed a tear about water breaching your sliding glass doors. As with all sliding door repairs, leave these to the professionals! Sliding door experts will get the job done quickly and skillfully.

Most patio sliding glass doors come with a built-in system to drain water away and prevent it from penetrating your home. During a rainstorm water hits the outside of the glass, dropping to the track system and draining away from the door thru weep holes. Weep holes are small slots in the exterior section of the door track designed to provide drainage when water comes in contact with the glass door. They are a critical door design feature and, to prevent water from breaching your doors, you must maintain them free of obstructions.



Most patio sliding glass doors come with a built-in system to drain water away and prevent it from penetrating your home. During a rainstorm water hits the outside of the glass, dropping to the track system and draining away from the door thru weep holes. 

What laboratory tests should impact windows and doors pass?

Schedule a FREE inspection visit

Schedule a FREE
inspection visit